Geonav IoT: a precise positioning solution for both outdoor and indoor environments
GEONAV IoT is an innovative Thales IoT solution, allowing real-time Indoor/Outdoor precise (<1m) tracking at PNT (Position, Navigation, Timing) User level and available worldwide.
GEONAV IoT positioning algorithms take advantage of two existing positioning technologies that have already proven themselves: E-GNSS (European Global Navigation Satellite System) and Ultra-Wide Band (UWB).
In constrained areas, the GEONAV IoT solution improves GNSS positioning, by deploying a light UWB infrastructure computing an augmented GNSS-UWB PVT (Position, Velocity, Timing) information.
The main specification for this solution is portability, making it possible to run the software in conventional IT infrastructures like PCs and servers but also on mobile platforms like smartphones, tablets and embedded devices like IoT platforms.
The GEONAV IoT solution offers the following benefits:
Locate people or assets with high precision in all environments, even in constrained areas.
Move from indoors to outdoors (and vice versa) without discontinuity on location.
Use IoT to transmit computed data (position, intelligence etc.) in real time on a public or private network.
Choose the best communication protocol for each use case (5G, Lora, Sigfox etc.).
Display computed data on a supervision tool.
The H2020 program
In 2019, the European Union Agency for the Space Programme (EUPSA) chose the GEONAV IoT solution to take part in Horizon 2020 (H2020), a European funding programme to support research, technological development and innovation. Under this programme, the GEONAV IoT solution will be further developed for three use cases (elite sport, asset management, autonomous drones). For this purpose, Thales set up a consortium with various European partners.
Thales, as leader of the consortium, has responsibility for the overall solution and development of all GEONAV IoT firmware and software (positioning library).
Hertz Systems is in charge of GEONAV IoT hardware production and its industrialization.
ChipCraft is providing a dual-frequency GNSS chipset, called NaviSoC which will be integrated in GEONAV IoT devices.
Drone Consultants Ireland, a drone manufacturer, is in charge of integrating and testing GEONAV IoT for the autonomous drones use case.
Telespazio is in charge of dissemination activities in order to prepare for operational use.
After going through hard time due to COVID crisis, GEONAV IoT is now ready to start performance testing of the Drone solution.
Thales participated in GSA User Consultation Platform as part of the European Space Week. GEONAV IoT has been presented during the Mass Market session with the Elite Sport and Asset Tracking use cases.
The project has been launched for a 24 month journey!
The kick-off meeting took place in GSA headquarters in Prague with consortium representatives from Thales, Drone Consultants Ireland, Telespazio France, Chipcraft.
After an almost 3 year journey, the GEONAV IoT project has reached its conclusion. The GEONAV IoT team can be proud of the achievement made along these years. And work is continuing !
The GEONAV IoT team is gathered in Dublin together for a demonstration day where partners are showcasing the end-to-end GEONAV IoT Drone Solution and other assets developed during this stimulating project !
After overcoming multiple challenges both technical and health, the GEONAV IoT team is pleased and proud to announce the demonstration of its drone solution this week in Dublin! The industrial partners will also present the main GEONAV IoT achievements.
GEONAV IoT partners reached a new milestone. The first drone flight tests have been conducted by Drone Consultant Ireland and Thales in Dublin a few days ago. The end-to-end chain of GEONAV IoT drone solution successfully worked. The observed performances are very promising !
The GEONAV IoT solution follows the following architecture:
GEONAV IoT is composed of:
User terminal devices:
Location algorithms based on GNSS and UWB.
Embedded intelligence to manage IoT information depending on each use case.
Communication module to receive GNSS & UWB measurements and transmit IoT information.
UWB beacons (pseudolites):
Specific firmware for calibration and time synchronisation functions.
Communication module to provide UWB measurements and receive synchronisation information.
Under the H2020 programme, the overall solution will be updated with two new functionalities to improve performance:
Integration of 5Gfor data transmission and positioning (hybridisation with UWB and GNSS).
Integration of the dual-frequency GNSS chipset.
GEONAV IoT is primarily aimed at location based services (LBS) markets. Thales has tested this solution on three specific markets with partners.
Example : monitoring of Rugby players
The GEONAV IoT solution can be used in elite sport to monitor player position and performance.
This use case has been investigated for rugby players, in partnership with the French Rugby Federation's R&D department. The partners have tested the ability of the solution to monitor players' performance and safety in three types of environments: indoors (covered stadiums), indoors/outdoors (partially covered stadiums) and outdoors (uncovered stadiums, training fields, etc.). In this case, the GEONAV IoT device computes and transmits a set of information on the player in real time (1 Hz frequency):
Position and speed.
Heart rate (by Bluetooth connection to the cardio belt).
Devices are also designed in order to respect World Rugby regulation (size, weight, resistance to impacts etc.).
Find out more about our research partnership with ESA entrusted by the performance department of the French Federation of Rugby!
Example : location of high-value equipment inside industrial sites
The GEONAV IoT solution can be used industry, to monitor the positions of equipments and tools inside industrial sites.
This use case has been tested for military vehicle parts in partnership with Nexter Systems.
Nexter Systems uses the GEONAV IoT solution to precisely locate equipment at regular intervals (every 6 hours), and to track machines and tools on their production sites and during inter-site transit. GEONAV IoT meets the requirements of two industrial use cases:
Production process monitoring: precise indoor/outdoor location of equipment to monitor physical position of assets in the workshop throughout the production process (integration, tests, quality and shipping).
Value-added tooling geolocation for specific tools (crimping pliers, torque wrenches, power supply or tests modules, etc.) used on two production sites 40 km apart: permanent location of assets improves production planning and efficiency and monitors tool calibration.
This use case needs specific autonomy management to reach up to 18 months of autonomy.
Example : location of autonomous drones used for meal delivery
The GEONAV IoT solution is currently being adapted to be integrated inside autonomous drones, in order to replace the GPS chipset they currently use. Position and speed are computed in real time and directly sent to the drone.
This use case is being developed in partnership with Drone Consultants Ireland, an autonomous drone manufacturer, and an end user, Manna Aero, which uses drones for home delivery.
The Drone GEONAV IoT has been showcased during the “Demonstration Day” late November at "Institute of Art, Design and Technology" campus in Dublin (IADT - Dun Laoghaire), Drone Consultant Ireland premises. This demonstration day has also been the opportunity for all partners to share on the latest project's advancements and on the coming industrialization of the solution.
This project has received funding from the European Union Agency for the Space Programme under the European Union’s Horizon 2020 research and innovation programme (grant agreement No 870249).
The opinions expressed in this document reflect only the author’s view and in no way reflect the European Commission’s opinions. The European Commission is not responsible for any use that may be made of the information it contains.